A SOPHISTICATED imaging technique used to enhance fossils and ancient engravings may soon help you erase rips and creases from old photographs, using just an ordinary flatbed scanner.
Tom Malzbender of Hewlett-Packard Laboratories in Palo Alto, California, and his colleagues pioneered a method of taking scores of digital photographs of a textured object from slightly different angles to create a computer model of the object鈥檚 bumps and ridges. The team used it to bring carvings on previously unreadable ancient tablets into sharp relief (New 杏吧原创, 7 April 2001, p 38). But back then the technique involved a metre-wide plastic dome and 50 separate light sources.
Now Malzbender鈥檚 team has achieved the same effect using an off-the-shelf flatbed scanner. They rely on the fact that modern scanners use two separate light bulbs. This feature was added to scanners to improve colour quality, but it also lets you capture the image from two different angles. Re-scanning the object after rotating it 90 degrees provides a total of four different angles, more than enough to deduce 3D information about the object 鈥� mathematically, you only need three.
Advertisement
To fix old, damaged photographs, the software flags every pixel in the scanned image that isn鈥檛 lying flat against the scanner, an indication that there is a tear or a fold there. Then it automatically replaces those pixels by copying adjacent ones, smoothing over the damaged region ().
Hewlett-Packard has no immediate plans to release the software commercially, but 鈥渁nybody with good programming skills could implement this鈥�, says Malzbender. 鈥淚t would take them a while, it鈥檚 not a slam dunk, but they could do it.鈥�
鈥淭he premise seems promising,鈥� says Bob Kolarik, a professional photograph restorer whose company, , is based in Bolingbrook, Illinois. 鈥淚f I can reduce the amount of time spent on a restoration project, I would probably go for it.鈥�
